New series of laser modules, suitable for EleksMaker® laser engraver, and also other engraver that ensures XH2.54-3P interface and DC 12V input voltage.
|Heatsink Material||Aircraft Aluminum|
|Section Size||30mm x 30mm|
|Cooling Mode||Heat Sink Groove, Cooling Fan|
|Dimension||90 * 30 * 30mm|
|Adapter Plug||US Plug|
|Adapter Input Voltage||AC 100-240V|
|Adapter Output Voltage||DC 12V 2.5A|
|Can Engrave||MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum|
|Can Not Engrave||Metal/Glass/Stone/Ceramics/Stainless Steel/Reflective Material/ Transparent Material|
|Beam Shape||Dot (Focusable)|
|Working Voltage||DC 12V|
|Drive Mode||External ACC|
|Life Time||>10,000 hours|
* This module can be compatible with TTL or PWM modulation, (But it can just select either function at a time.) while TTL can control the switch on/off and PWM can control the adjustment of laser power.
* There is a button on the driver board which control ON/OFF of weaklight mode.
– Press it, the module turns to weaklight mode, then the laser light emitting becomes weak and won't work on material. At this time, it can used for positioning as preparation before engraving.
– Press it again, it returns to normal engraving mode, the laser light is powerful to work on material.
1 x 3000mW Blue Laser Module
1 x Power Adapter
2 x Connector Cables
(Carboard Box Packing)